Steel Anti-Static Floor

Steel Anti-Static Floor

DT-HDG-600-35

Applicability:

Made of high-quality cold-rolled steel panels, this raised floor is spot-welded after stretching, coated with electrostatic powder after phosphating, filled with standard cement, and finished with conductive PVC or HPL on the surface. Conductive edge trim is installed on all four sides.

Standard:

FS600、FS800、FS1000、FS1200

Features

Product Features

  1. 全钢结构，强度高、承载能力强、耐冲击性能好
  2. 表面静电喷塑，柔光、耐磨、防水、防火、防尘、防腐蚀
  3. 粘贴的装饰高压层板，耐磨性及防静电性能优良、抗污染、便于清洗、装饰性强
  4. 组装灵活、维修方便、使用寿命长
  5. 可任意切割，安装附件方便
  6. 架空高度可以随意定制，下部空间可以用来排线，通风用

Applications

Main Applications

Parameters

Technical Parameters

Tested in accordance to MOB and CISCA Standard

Panel Model Panel Size (mm) Concentrated Load Uniform Load Ultimate Load Rolling Load (KN) Impact Load
LB KN KG KN/m2 KN 10 Passes 10,000 Passes KN
DTFS668 600 X 600 X 35 668 3.0 303 13 9 2.2 1.5 0.67
DTFS800 600 X 600 X 35 800 3.6 363 20 11 3 2.2 0.67
DTFS1000 600 X 600 X 35 668 3.0 303 13 9 2.2 1.5 0.67
DTFS1250 600 X 600 X 35 668 3.0 303 13 9 2.2 1.5 0.67
DTFS1500 600 X 600 X 35 668 3.0 303 13 9 2.2 1.5 0.67
DTFS2000 600 X 600 X 35 2000 9.0 907 50 27 6.8 5.7 0.67
Electrical Resistance: 1 x 107 ohm - 1 x 108 ohm
Copyright © 2003 Changzhou Weixing Computer Room Equipment Co., Ltd. All rights reserved.